Standard PDF

IS 9873-5:2017

IS 9873 (Part 5) : 2017

ISO 8124-5 : 2015

Indian Standard

Safety of Toys

Part 5 Determination of Total Concentration of

Certain Elements in Toys

ICS 97.200.50

Plastics Sectional Committee, PCD 12


This Indian Standard (Part 5) which is identical with ISO 8124-5 : 2015 ‘Safety of toys — Part 5: Determination

of total concentration of certain elements in toys’ issued by the International Organization for Standardization

(ISO) was adopted by the Bureau of Indian Standards on the recommendation of the Plastics Sectional

Committee and approval of the Petroleum, Coal and Related Products Division Council.

This standard has various parts under general title ‘Safety of toys’. Other parts in this series are:

Part 1

Safety aspects related to mechanical and physical properties

Part 2


Part 3

Migration of certain elements

Part 4

Swings, slides and similar activity toys for indoor and outdoor family domestic use

Part 6

Determination of certain phthalate esters in toys and children’s products

Part 7

Requirements and test methods for finger paints

Part 9

Certain phthalates esters in toys and children’s products

Further, the Committee has decided to formulate the following new part of this standard which is under


Part 8

Age determination guidelines

The text of ISO Standard has been approved as suitable for publication as an Indian Standard without

deviations. Certain conventions are, however, not identical to those used in Indian Standards. Attention is

particularly drawn to the following:


Wherever the words ‘International Standard’ appear referring to this standard, they should be

read as ‘Indian Standard’.


Comma (,) has been used as a decimal marker while in Indian Standards, the current practice

is to use a point (.) as the decimal marker.

In this adopted standard, reference appears to certain International Standards for which Indian Standards

also exist. The corresponding Indian Standards which are to be substituted in their respective places, are

listed below along with their degree of equivalence for the editions indicated:

International Standard

Corresponding Indian Standard Degree of Equivalence

ISO 3696 Water for analytical

laboratory use — Specification and test


ISO 8124-1 Safety of toys — Part 1:

Safety aspects related to mechanical

and physical properties

ISO 8124-3 Safety of toys — Part 3:

Migration of certain elements

IS 1070 : 1992 Reagent grade water —

Specification (third revision)

IS 9873 (Part 1) : 2017 Safety of toys :

Part 1 Safety aspects related to

mechanical and physical properties

(third revision)

IS 9873 (Part 3) : 2017 Safety of toys :

Part 3 Migration of certain elements

(second revision)

Identical with

ISO 3696 : 1987

Identical with

ISO 8124-1 : 2014

Identical with

ISO 8124-3 : 2010

On page 9 Clause shall be read as

In reporting the result of a test or analysis made in accordance with this standard, if the final value, observed

or calculated, is to be rounded off, it shall be done in accordance with IS 2 : 1960 ‘Rules for rounding off

numerical values (revised)’.

  Click to view the PDF online  

PREVIOUS:IS 9873-6:2017 NEXT:IS 9873-3:2017


Scan the qr codeclose
the qr code