To calibrate the gauge, a push force of 1 N is applied on the steel rigid wire in the direction of its axis: the characteristics of the gauge internal spring shall be such that the surface A – A′ is b
The scratching tool tip is for home appliances whose accessible element surface of all protected cooling system, including the c accessible element surface that have close contact with a protected coo
Test Finger Nail meets the standard requirements of IEC60335 UL1025 UL1278 UL507. The Test Finger Nail is a wide range of probes to meet the most common standards including those from IEC, EN, UL, GB,
The Impact Ball 50mm is designed to test impact according to IEC, UL, and CSA standards. The Impact Ball complies with IEC 60950. It is made of stainless steel.
It is mainly used for thin-layer insulation material electric strength. Fixture have two sizes: Ø5mm 100g and Ø6.8mm 50g. For different test samples should be take different metal bar and test bar. Th
The standard requires rotary power mowers to have protective shields. These shields prevent the operator's foot from contacting the blade, either under the mower's deck or in the discharge chute area,
The stirrer shall incorporate a biased-off switch that is recessed or guarded to prevent accidental operation. It conforms to the IEC60335-2-14 requiremen.
75mm test probe meets the standard requirements of IEC 60335, used for judging whether the surface that the probe is unreachable has the necessity to do the temperature rise test.
Nina She