The test probe is carried out with a test probe similar to that of test probe B of IEC 61032 but having a circular stop face with a diameter of 125 mm instead of the non-circular face, the distance be
The test probe is carried out with a test probes similar to that of test probe B of IEC 61032 but having a circular stop face with a diameter of 125mm and thickness of 80mm instead of the non-circular
Used on enclosures prior to accessibility testing. The test hook is "hooked" into vents and seams in the enclosure & then pulled with a force (usually 20N). Made entirely of stainless steel. Complies
12mm Hemispherical Hard Rod meets IEC60950 Figure 2C and UL6500 Figure B.1 standards. is for the absolute share TNV circuits information technology to see if they provide sufficient protection.
This product is used for testing access to document shredders. The Jointed Accessibility Wedge Probe is a high precision probe made in exact accordance with UL and IEC standards such as UL60950 Figure
The Jointed Test Finger is a precision test probe made according to Figure 2 (Fig. 2) of the IS 1401 (Test probe B) and is used to simulate a human finger. It is also used by the standards of CSA, IRA
Nina She