12mm Hemispherical Hard Rod meets IEC60950 Figure 2C and UL6500 Figure B.1 standards. is for the absolute share TNV circuits information technology to see if they provide sufficient protection.
This product is used for testing access to document shredders. The Jointed Accessibility Wedge Probe is a high precision probe made in exact accordance with UL and IEC standards such as UL60950 Figure
The Jointed Test Finger is a precision test probe made according to Figure 2 (Fig. 2) of the IS 1401 (Test probe B) and is used to simulate a human finger. It is also used by the standards of CSA, IRA
Test Finger Nail meets the standard requirements of IEC60335 UL1025 UL1278 UL507. The Test Finger Nail is a wide range of probes to meet the most common standards including those from IEC, EN, UL, GB,
Mainly used for the inspection to prevent the body touch dangerous live parts,heating or hot parts, mechanical components, as well as inspection of solid foreign bodies into the equipment. It is neces
UL Rigid test finger 130A meets the standard requirements of UL 507&UL 1287, used for simulating fingers and appliances. It is mainly used for checking whether the live parts are touched. Mainly used
The probes referenced in Table 9.1 and illustrated in Figures 9.1 and 9.2 shall be used as measuring instruments to judge the accessibility to uninsulated live parts and film-coated wire provided by o
The probe is used for the enamel wire, shall be applied to any depth that the opening will permit and shall be rotated or angled before, during, and after insertion through the opening to any position
Nina She