It conforms to standard requirement of UL1310 Fig 16.4(S3252). It is used for testing accessibility to hazardous moving parts such as access to fan blades through a fan finger guard.
The test probe is carried out with a test probe similar to that of test probe B of IEC 61032 but having a circular stop face with a diameter of 125 mm instead of the non-circular face, the distance be
The test probe is carried out with a test probes similar to that of test probe B of IEC 61032 but having a circular stop face with a diameter of 125mm and thickness of 80mm instead of the non-circular
This probe may be used to verify the protection of persons against access to hazardous parts, and to verify the mechanical strength of openings in the enclosure or internal barriers.
Used on enclosures prior to accessibility testing. The test hook is "hooked" into vents and seams in the enclosure & then pulled with a force (usually 20N). Made entirely of stainless steel. Complies
12mm Hemispherical Hard Rod meets IEC60950 Figure 2C and UL6500 Figure B.1 standards. is for the absolute share TNV circuits information technology to see if they provide sufficient protection.
This product is used for testing access to document shredders. The Jointed Accessibility Wedge Probe is a high precision probe made in exact accordance with UL and IEC standards such as UL60950 Figure