Technical Articles

IEC 60884-1 2002-06, Edition 3.0 List Apparatus

TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING
IEC 60884-1:2002-06, Edition 3.0
 
Plugs and socket-outlets for household and similar purposes -
Part 1: General requirements
 
R=Required by Lab       S=May be subcontracted         3PPS=Three Phase Power Supply required
Clause
Measurement/testing
Testing / measuring equipment / material needed/ quipment
Subcontracting
8.8
Test of markings
Water, petroleum spirit
R
9
Checking of dimensions
 
Caliper, micrometer, gauges
Caliper, micrometer, plugs and sockets testing gauge (12units)
R
10
Protection against electrical shock
 
Jointed test finger, unjointed testfinger, electrical indicator,
Figures 9 and 10: Gauges for checking non-accessibility of live parts, through shutters, and of live parts of socket-outlets with increased protection,
Test plug
Jointed test finger (SFT S1-2010)
Unjointed test finger (SFT S1-2015)
Electrical indicator (SFT S1-2049)
Figures 9: Probes of 20N (SFT S1-2036)
Figures 10: Probes of 1N (SFT S1-2036)
R
11.5
Measuring of contact resistance
 
AC source, measuring instruments
AC source
R
12.2
Tests on screw terminals
 
Screw driver and spanner with torque meter, weights,
Figure 11: Arrangement for checking damage to conductors
Figure 11: Arrangement for checking damage to conductors (SFT S2-1302)
R
12.3
Tests on screwless terminals Weights
 
Figure 11: Arrangement for checking damage to conductors,
AC source, measuring instruments,
Figure 12: Deflection test apparatus
Figure 11: Arrangement for checking damage to conductors (SFT S2-1302)
Figure 12: Deflection test apparatus of screwless terminals
R
13.14
Lateral strain of socket-outlets
 
Figure 13: Device for checking the resistance to lateral strain
Socket &Plug Pull Strength and Transverse Stress tester (SFT S2-1305)
R
13.23
13.24
Test on membranes
 
Heating cabinet, Freezer 
Heating cabinet,   Freezer   
R
14.2
Test of non-solid pins
 
Figure 14: Device for testing of non-solid pins
Figure 14: Device for testing of non-solid pins 100N (SFT S2-1303)
R
14.23.1
Temperature rise test on plugs of plug-in equipments 
 
AC source, measuring instruments, temperature measuring device
Temperature rise testing on plugs of plug-in equipments
R
14.23.2
Torque test on plugs of plug-in-equipment
 
Apparatus for the torque test
Apparatus for the torque test on plug (SFT S2-1300)
R
16.1
Ageing test
Heating cabinet, humidity chamber,
Heating cabinet,  humidity chamber
R
16.2
Ingress of water
Test devices according to IEC 60529
IPX1-6 tester (SFT S2-10XX)
Figure 15: Test wall in accordance with the requirements of 16.2.1
Test wall 
R
16.3
Humidity treatment
Humidity chamber 
Humidity chamber 
R
17.1
Insulation resistance
Insulation test equipment
Insulation test equipment (TOS7200)
R
17.2
Electric strength
High voltage test equipment
High voltage test equipment
R
19
Temperature rise
 
AC source, measuring instruments, temperature measuring device, test block for flush-mounted accessories
Temperature rise testing on plugs of plug-in equipments
R
20
21
Breaking capacity 
Normal operation  
Figure 16: Apparatus for breaking capacity and normal operation,
AC source, adjustable load (resistors and inductors), measuring instruments,
Figure 9: Gauge for checking non-accessibility of live parts, through shutters, after normal operation test,
Figure 10: Gauge for checking non-accessibility of live parts, through shutters, and of live parts of socket-outlets with increased protection
Figure 16: Apparatus for breaking capacity and normal operation test (SFT S2-1321)
Figures 9: Probes of 20N (SFT S1-2036)
Figures 10: Probes of 1N (SFT S1-2036)
R
3PPS
22.1
Verification of the maximum withdrawal force
 
Figure 18: Apparatus for checking the withdrawal force, test-plug
Socket &Plug Pull Strength and Transverse Stress tester (SFT S2-1305)
R
22.2
Verification of the minimum withdrawal force
 
Figure 19: Gauge for the verification of the minimum withdrawal force
Socket &Plug Pull Strength and Transverse Stress tester (SFT S2-1305)
R
23.2
Test of the cord retention
 
Figure 20: Apparatus for testing the cord retention,
Apparatus for the torque test
Apparatus for cord retention testing (SFT S2-1306)
R
23.4
Flexing test
Figure 21: Apparatus for flexing test
Plug and Cord Flexibility Tester (SFT S2-1501)
R
24.1
Impact test
Figures 22, 23, 24, 25 and 26: Impact-test apparatus
Pendulum impact test apparatus (SFT S2-1307)
R
24.2
Tumbling barrel test
Tumbling barrel according to IEC 60068-2-32
Tumbling barrel test machine (SFT S2-1060)
R
24.3
Test on ordinary surface-type socket-outlets
 
Cylinder of rigid steel sheet,
flat steel sheet 
Apparatus test on ordinary surface-type socket-outlets
R
24.4
Impact test at low temperature
Figure 27: Apparatus for impact test at low temperature
Apparatus for impact test at low temperature (SFT S2-1308)
R
10.1
24.5
Impact test at low temperature\
Figure 38: Arrangement for compression test
Apparatus for compression test (SFT S2-1312)
R
24.6
Test on screwed glands
 
Metal rods,
test-spanner with torque meter
Torque
R
24.7
Abrasion test
 
Figure 28: Apparatus for abrasion test on insulating sleeves of plug pins
Apparatus for abrasion test on insulating sleeves of plug pins
(SFT S2-1309)
R
24.8
Test on shutters
 
Test-pin, electrical indicator
Apparatus Test-pin test on shutters
R
24.9
Test on multiple portable socket-outlets
 
Figure 29: Arrangement for mechanical strength test on multiple portable socket-outlets
Arrangement for mechanical strength test on multiple portable socket-outlets
R
24.10
Test of the fixing of the pins
Figure 30: Example for test arrangement to verify the fixation of pins in the body of the plug
Apparatus for test arrangement to verify the fixation of pins in the body of the plug (SFT S2-1311)
R

CATEGORIES

CONTACT US

Contact: Eason Wang

Phone: +86-13751010017

E-mail: sales@china-gauges.com

Add: 1F Junfeng Building, Gongle, Xixiang, Baoan District, Shenzhen, Guangdong, China

Scan the qr codeclose
the qr code